Our Products : D-bolt©

All of our products are packed in neutral packaging, allowing for white labeled production. If you have any bespoke requirements, please contact us.

Twin-thread masonry anchor bolt with fitted flange

Engineered thread for removal of waste

Suitable for :

Fixing to a variety of materials e.g. blocks, brick, stone and concrete. Enables extreme
close to the edge fixing without stress to the sub structure.

Application:

Drill hole to required diameter and depth (see chart) then remove debris. Position D-Bolt©
through item, and simply screw home with required socket/spanner. The unique twinthread
design removes the masonry swarf from the thread and stops the tension found on
lesser designed anchors. D-Bolt© can be removed for future use. Engineered collar means
no extra washer or flange is required.

Material:

Produced and engineered from extremely high quality carbon steel then heat treated to achieve tensile strengths of 1080N/mm2.

Finish:

Bright Zinc Coated for protection.

SIZES: (Note: a 6mm pilot hole is required)

• From M6 x 45mm to the largest recommended M12 x 150mm
  (See chart for required size / length).

PACKAGING:

Packed in neutral packaging (own label showing company name, code and bar codes can be added). Each carton contains White Plastic covering caps and one Torx T30 driver

QUANTITY PER CARTON: Depends on bolt size and length